Lifting capacity up to 300 kg

The rail system, Quick-Lift Driven 300i (QLD 300i) is a unique, motorized lifting device that easily covers large areas horizontally, with a lifting load up to 300kg.
It is an excellent versatile system for production lines as well as for working at various stations simultaneously. With this equipment, you improve ergonomics and increase productivity without impairing precision and safety.
It is delivered preassembled with one lifting motor and three motors for the movement in X and Y directions. The control handle can be attached to a standardized or customized End Effector used to lift and handle a specific object determined by the customer.
As the QLD was designed with a narrow width, it can easily be assembled into existing rail systems. Equipped with a wireless communication system, the handle can be accessed conveniently during maintenance and service.

QLD
QLD

Technical information

Lifting capacity Max. 300 kg.

Lift motor
Stepless servo-controlled asynchronous motor

Drive System Three asynchronous motors

Stroke length 2.7 meters

Power supply
400-480V, 50-60 Hz, 3P+N+E, 16A

Material Rails made of anodized aluminum

Manoeuvring
Manoeuvring is done with Binar Handling’s patented manoeuvring handle and wire angle sensors. Only a small force is needed to engage the up/down motion.
The equipment also follows the operator’s movement horizontally.
Horizontal movements of the load make the lifting wire deviate from its vertical line. The drives then start and move in the same direction as the wire has deviated from its vertical line. One (1) meter per second, is the maximum speed horizontally.

Work area
Maximum width of work area 9,0 m.
Total width of trolley = work area + 1,5 m.

Attachment
Rails for X-movement can be mounted on floor pillar, wall or ceiling brackets.
Max. c/c x-rails 4,5 m.
Max. c/c supports in x-direction 4,5 m.

End effector
End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality.

Options
– Color of motor unit that deviates from the standard