QLA TORQUE 350s max. 350 Nm
Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety and efficiency.
Provides possibility to effortlessly handle eccentric loads. Easy to use, thanks to outstanding reaction, regardless of load weight.
The solution includes an adaptation of vertical torque arm and torque trolley, mounting of the torque attachment onto the horizontal arm at Binar Quick-Lift Systems AB.
A special calculation needs to be performed to determine the horizontal and vertical arm lengths. This has to be done by Binar Quick-Lift Systems AB in corporation with resale office and the customer.
Technical information
Lifting capacity Max. bending moment 350 Nm. at gripper base
Depending on horizontal and vertical arm length. Calculation needs to be performed.
Max bending moment 350 Nm. at gripper base
Lift motor Stepless servo-controlled asynchronous motor
Weight 43 kg
Stroke length 2.7 meter
Manoeuvring
Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and smooth speed control.
Only a small force is needed to engage the up/down motion. When the operator let go of the handle, the up/down motion is immediately stopped.
Power supply 230V, 50-60 Hz, 1-phase with ground protection, 10A
Options
– Color of Motor unit that deviates from the standard.
Hinged arm
Made in painted aluminium profiles, and vertical profiles in anodized aluminium
Attachment
Floor pillar in painted steel with a standard height of 3 m.
Optional pillar heights up to 5 m.
End effector
End effectors are designed to fit customer needs.
Intelligent I/O signals are available for optimum functionality